News
Until now, DJI's compact wireless mic lineup has had a clear budget option in the Mic Mini series and a clear flagship in the Mic series, with a gulf of features and price separating the two. The Mic Mini 2S changes things, and slots right into that gulf. It's not quite a flagship-killer, but with this release, DJI now has three tiers of small wireless mic — and this middle one is very appealing.
Much of the flagship DJI Mic 3's DNA has trickled down into the Mic Mini 2S: internal recording, 32-bit float support, AI-driven noise cancellation, adaptive gain modes, fast file transfers. These were all things that, until now, meant paying a premium. The Mini 2S borrows them wholesale, wraps them in the same pocket-sized transmitter and case as the standard Mic Mini 2, and undercuts the Mic 3 comfortably on price.
Audio quality is superb. Whether I was recording via the receiver connected to a camera or going wireless direct to an OsmoAudio device, the results were clean, full-bodied and detailed. An impressive feat for a supposedly budget offering.
Noise cancellation is another highlight. The new AI-assisted system handled everything I threw at it, from a droning desk fan to a chatter-filled pub garden, with a level of polish that puts some real distance between the Mini 2S and its S-less little sibling. It's not quite at the level of the class-leading Insta360 Mic Pro, but it's a comfortable step up from the standard Mic Mini 2's basic noise reduction.
(Image credit: Future | Sam Kieldsen)Having tested both the Mic Mini 2 and Mic 3 extensively as well as the Mini 2S, I'd say the average creator might struggle to justify paying the Mic 3 premium now. Those with more demanding needs still have reasons to look past the Mini 2S, though: the Mic 3 offers more than double the onboard storage per transmitter, a touchscreen receiver display for on-the-fly monitoring, dual-file recording, onboard timecode, and more granular gain control — stuff which probably matters for professional productions.
For everyone else, the Mini 2S is the new sweet spot in DJI's range. It's a tiny mic that really punches above its weight.
DJI Mic Mini 2S: price and release date- Released August 4 2026, priced from £59 / AU$99 to £183 / AU$328
- Sold in four separate bundles, plus individual transmitters, charging cases and cover sets
- Available globally — aside from in the US
The Mic Mini 2S launched globally on August 4 2026, not long after the Mic Mini 2's April 2026 arrival. I say "globally", but as with every other DJI product released recently, it isn't officially available in the US, with the company blaming ongoing regulatory hurdles.
The Mini 2S comes in a wide range of configurations. At the low end, a single transmitter (TX) costs £59 / AU$99, while receivers (RX) add to the cost. The core bundles are the DJI Mic Mini 2S (1 TX + 1 RX) and the DJI Mic Mini 2S (1 TX + 1 Mobile RX + Charging Case), both priced at £79 / AU$149. Stepping up, the DJI Mic Mini 2S (2 TX + 1 RX + Charging Case) costs £169 / AU$279, while the priciest option, at £183 / AU$328, has 2 TX + 1 RX + Charging Case as well as a Mobile RX.
The DJI Mic Mini 2S (2 TX + 1 RX + Charging Case) bundle, available from £169 / AU$279. It also includes a box of colored covers and a soft zip-up storage bag. (Image credit: Future | Sam Kieldsen)It's a big price jump over the Mic Mini 2, where equivalent bundles cost roughly half as much: £29 for a standalone transmitter and £89 for the full 2 TX + 1 RX + Charging Case kit. It also puts the Mini 2S's 2 TX + 1 RX + Charging Case at the same price as the entry-level Mic 3 bundle (£169 for 1 TX + 1 RX).
DJI Mic Mini 2S: specsDimensions
TX: 28.6 x 28 x 13.5mm / RX: 46.5 x 29.6 x 19.3mm / Mobile RX: 39.3 x 27.3 x 9mm
Weight
TX: 0.4oz / 12g (with magnetic front cover, without clip or magnet) / RX: 19g / Mobile RX: 6.5g
Range
With standard RX: up to 400m / with mobile RX: up to 300m
Connectivity
RX: USB-C / Lightning, 3.5mm jack
Bluetooth
Yes (Bluetooth 6.0)
Battery
11 hours (transmitter), 10 hours (receiver), up to 40 hours with fully charged case
Noise cancelling
Two-level, AI-powered
DJI Mic Mini 2S: Design- Looks nearly identical to the Mic Mini 2
- Features swappable magnetic covers in range of colors
- Redesigned charging case now fits the 3.5mm cable
If you've seen the Mic Mini 2, you already know what the Mini 2S looks like. DJI has barely touched the exterior: the transmitters are the same size with the same interchangeable magnetic front covers (available in the same range of colors, from timeless black to a fetching shade of magenta). The receiver, too, is essentially unchanged, which means there's no onboard display to keep an eye on gain or adjust settings; you'll need to open up the Mimo app on your smartphone to do that.
The family resemblance is generally no bad thing. At just 0.4oz / 12g with a cover attached, I barely noticed the transmitter magnet-attached to my shirt, and I couldn't feel it at all when clipped to the peak of a baseball cap. The detachable clip still rotates through 360 degrees (in 90-degree increments) so the mic capsule can be aimed correctly whichever way you've mounted it, and the magnet option remains handy for thinner fabrics where a clip might snag.
Future | Sam KieldsenFuture | Sam KieldsenFuture | Sam KieldsenFuture | Sam KieldsenFuture | Sam KieldsenThere is one small but positive design change: DJI has found room for the 3.5mm cable inside the charging case (something the Mic Mini 2's case couldn't manage) which means the entire two-transmitter setup, cables, windshields and mounting options included, now fits in one pocketable case. With portability being a huge part of the appeal for a mic like this, it's a step in the right direction.
DJI Mic Mini 2S: Performance- Offers internal recording with 14.5GB of storage space on transmitters
- Includes AI noise cancelling, improving on the Mic Mini 2's system
- Transmitter battery life roughly in line with Mic Mini 2's, and better than Mic 3's
The Mic Mini 2S's marquee upgrade over the Mic Mini 2 is internal recording, which I think is a huge deal. Every previous Mic Mini had to transmit to something — either a receiver, or an OsmoAudio device — to be of any use, but the Mini 2S transmitter can function just fine all on its own. With around 14.5GB of usable storage on each transmitter, it can store up to 28 hours of 24-bit recordings, or around 22 hours of 32-bit float recordings.
For those who aren't familiar, 32-bit float (which is available on the DJI Mic 3 but not the Mic Mini or Mini 2) doesn't inherently make your recordings sound better, but rather dramatically widens the available dynamic range. If levels unexpectedly spike or dip during a recording, 32-bit float gives you far more room to correct for that in post without clipping or losing detail. It's less about raw quality and more about insuring you're covered when recording in unpredictable environments.
The Mic Mini 2S receiver can connect to four transmitters at once, double the Mini 2's limit. (Image credit: Future | Sam Kieldsen)Another upgrade over the Mic Mini 2 is 4TX + 1RX support, meaning you can record from four separate transmitters onto a single receiver. I'd say this is a much more situational addition: handy if you're recording podcasts, panel discussions or similar, but not something most solo creators will need day to day.
File transfers are roughly twice as fast as the Mic Mini 2's when pulling recordings off the transmitter via the charging case. If you're regularly transferring lengthy 32-bit float recordings, those saved minutes might add up — but again, it's a situational improvement.
Noise canceling is where I noticed the clearest real-world improvement over the Mic Mini 2. The Mini 2S's AI-assisted system does a better job than the older mic's more basic noise reduction: it very nearly eliminated a loud desk fan running in my office, and noticeably cut through background chatter when I tested it in a busy pub garden so that my and my wife's voices remained nice and clear. For context, I still rate the Insta360 Mic Pro as the best noise-canceling wireless mic I've tested, but it also costs considerably more than this.
Alongside noise canceling, the Mini 2S also gets DJI's adaptive gain features, Clipping Control and Loudness Balance (previously available on the DJI Mic 3 but not the Mic Mini 2). The former automatically pulls back gain to stop sudden loud moments from distorting, while the latter lifts quieter sounds to even out levels — useful if you're recording somewhere volume might swing unpredictably.
The Mic Mini 2S's audio quality is superb no matter how you use it. It supports quality up to 96kHz/24-bit with the receiver connected to a camera, or up to 48kHz/24-bit over a direct OsmoAudio connection, plus the aforementioned 32-bit float. Frankly, I don't think most people (myself definitely included) would be able to reliably pick a Mini 2S recording out from one made on the considerably pricier flagship Mic 3, which says a lot about how good this is for a supposedly budget microphone.
On the battery life front, things are roughly the same as they were on the Mic Mini 2: a transmitter can record for a round 11 hours on a full charge, while the receiver can keep going for around ten. With two transmitters, the receiver and a charging case, you can expect around 40 hours of combined use before needing to track down a power socket.
That's a bit worse than the Mic Mini 2 (which offers 11.5 hours, 10 hours and 48 hours across the transmitter, receiver and charging case), but much better than the Mic 3 (8 hours, 10 hours and 28 hours respectively).
Should I buy the DJI Mic Mini 2S?Buy it if…You want DJI Mic 3-esque performance without the Mic 3 price
With AI noise canceling, 32-bit float support and internal recording, the Mini 2S closes the gap to DJI's flagship mic very effectively – and at around half the cost.
You want reliable recording receiver-free
Internal recording means the Mini 2S transmitter can capture audio on its own, giving you a safety net if your wireless connection drops or you don't want to carry a receiver at all.
You're on a tight budget
The Mini 2S is roughly double the price of the standard Mic Mini 2, and the Mini 2 still does a perfectly good job for creators who don't need internal recording or AI noise canceling.
You want advanced pro-level features
Onboard timecode, dual-file recording, precise gain control and a touchscreen receiver display are still DJI Mic 3 exclusives.
Insta360 Mic Pro
Insta360's flagship costs a lot more than even the priciest Mini 2S bundle. It justifies that gap with noise cancelling that's a step above anything currently offered in a DJI-made mic, plus party pieces like a customizable E-ink display and switchable polar patterns.
Read our Insta360 Mic Pro review
DJI Mic Mini 2
If the Mini 2S's price compared to its predecessor gives you pause, it's worth remembering the standard Mic Mini 2 remains a very capable mic in its own right — albeit one with no internal recording, 32-bit float or AI noise canceling. For creators who don't need those, it's fantastic value for money.
Read our DJI Mic Mini 2 review
(Image credit: Future | Sam Kieldsen)How I tested the DJI Mic Mini 2S- Two weeks of testing indoors and outdoors
- Connected to Panasonic Lumix GH6, iPhone 13, OnePlus Pad and DJI Osmo Action 6
- Also tested using internal recording without a receiver or camera
I was sent a review sample of the DJI Mic Mini 2S (2 TX + 1 RX + Charging Case) kit, and tested it for a couple of weeks, putting it through its paces in a range of indoor and outdoor conditions from quiet offices to windy walks and busy public spaces. I paired it with my Panasonic Lumix GH6 mirrorless camera, my iPhone 13, a OnePlus Pad tablet and the DJI Osmo Action 6 via OsmoAudio, testing both wireless transmission and manual connections. I also tested the Mini 2S's headline new feature directly, using the transmitter as a standalone recorder with no receiver or camera involved at all.
- First reviewed: August 2026
- Read more about how we test
- DDR5 RAM pricing has risen swiftly again in Germany
- That means two months of sharp increases, backing up recent rumors that memory is going to get pricier
- An exec from the storage world has also said that SSD-related pricing pain is seemingly going to last until 2030
I've recently been writing about how the RAM crisis appears to be reaching new levels of severity, and unfortunately there's more evidence that the situation is worsening with the price of system memory and storage.
Wccftech noticed that 3D Center has a new set of monthly figures for the German retail market which shows that as of mid-August, DDR5 RAM pricing has risen to 486% of the cost it was in July 2025. So, effectively it's five times pricier than before the crisis began a year ago.
That's a substantial jump from the 445% level seen last month, and an even bigger increase than the previous month, in which prices were at 419%. To look at it another way, prices have risen 16% in August compared to the cost of DDR5 in mid-June.
Internal SSD prices have also increased 7.7% month-on-month in the German retail market – and those drives are now 2.2 times as expensive as they were pre-crisis – and Wccftech also picked up another interesting but bleak storage revelation.
Pua Khein-Seng, the CEO of Phison, which makes controllers for SSDs, observed that the NAND market (flash memory chips for SSDs) is in deeper trouble than was previously believed in terms of the time needed to ramp up production.
Taiwan's Commercial Times reports that Pua said he recently had a conversation with senior executives from a NAND manufacturer, and that he asked about how long it would take from investment (being made now) to actual mass production being realized.
The CEO noted (bear in mind translation issues): "He originally estimated it would take about two years, but the answer they gave was 'four years.'"
What this means is that the expectation is now that NAND supply difficulties are going to persist through to 2030 (rather than 2028).
Analysis: there may be trouble ahead…(Image credit: Shutterstock / Eshma)That's an unsettling prediction from the storage world, coming as it does on top of a lot of other recent bad news suggesting that the RAM crisis will last a long time, and possibly to 2030 and beyond – and that the remainder of this year, and 2027, are going to see matters get worse.
The German retail market appears to be a clear indicator of how things are going, seeing as DDR5 pricing had dropped slightly and then plateaued (more or less) since the beginning of 2026, but started a sharp climb in July as noted. Yes, this is just one source of info, but it's a snapshot of the market of a large European country, and it correlates with all the gloomy predictions we're hearing of late.
As 3D Center points out (again, this is translated): "The bigger picture now points to a worrying price trend, which is likely to break exorbitant levels very soon, unless this trend is halted – for which there are currently no indications."
Sadly, it seems that RAM and storage prices really are going to increase as 2026 rolls on. While there would appear to still be room for further hikes to SSDs (sadly), with system RAM it's arguable how much more consumers can take before they completely refuse to buy until costs come down at least somewhat. That said, new desktops and laptops are still going to be sold, so this isn't just about refusing to upgrade your home PC's memory, of course.
Rising demand and environmental concerns are driving governments around the world to secure resilient and scalable energy supplies.
The transition to alternative, sustainable solutions is accelerating as the limitations of traditional energy sources become increasingly apparent.
At the same time, net-zero commitments, regulatory pressures, and growing public demand for climate-conscious policies are driving an unprecedented surge in offshore wind development.
This boom in demand is in turn driving a significant shift in what the offshore workforce looks like.
As companies strive to attract the next generation of talent, offshore roles are increasingly moving onshore, creating new opportunities and transforming industry expectations.
More flexible careersTraditionally, marine engineering careers often meant tough, hands-on work out at sea, away from home and frequently in challenging weather conditions. Today, advances in technology and connectivity are transforming those roles.
Many professionals now divide their time between offshore assignments, remote operations centers (ROCs) and office-based work, creating more flexibility and opening up new career opportunities.
ROCs are locations from which uncrewed surface vessels (USVs), ocean-going ships which can operate without a human onboard, are controlled through a satellite connection.
They are increasingly deployed for complex offshore work including inspection and maintenance, remote mapping of the seafloor, or environmental monitoring of water quality, marine habitats or other ecological data.
USVs can be used for detailed subsea inspections, ensuring the integrity and safety of underwater infrastructure, or precisely map the seafloor of a proposed location for an offshore wind farm to determine suitability.
The flexibility provided by remote operations unlocks a wider talent pool, creating career opportunities for individuals who may have personal or medical constraints that prevent them from working offshore.
At the same time, automation is improving workforce safety by reducing exposure to offshore hazards and lowering accident risk, while allowing more work to be carried out from shore-based environments.
Rich datasetsMore broadly, the infusion of new technologies into the sector means the boundaries between IT and engineering are blurring as client demand for near real-time data on ocean conditions, seabed characteristics and weather patterns continues to grow.
That data can range from bathymetry and water-column data to acoustic backscatter, to understand the characteristics of the seabed’s topography and geology across a given site.
These datasets are essential to optimizing the installation and operation of offshore assets, including offshore wind farm infrastructure. Providers are under pressure to speed up the acquisition, analysis and delivery of these datasets, which can often be huge in scale, making it essential to balance the task of data management and sharing with seeking efficiencies in data analysis wherever possible.
Cloud data talentTo that end, talent is needed to help build cloud data pipelines, data lakes and the associated workflows back at base, drawing on skills in everything from data science and software engineering to project management and user experience design.
The USVs themselves accelerate the delivery of Geo-data, enabling faster access to results and recommendations so client project teams can make informed decisions sooner, compressing project timelines, reducing overall campaign costs, and cutting the time to financial return.
For the data scientists themselves, the remote nature of their role means they may be working on projects taking place anywhere in the world during their working week. From analysing near real-time data from an offshore project in the Middle East in the morning to building visualizations and client reports for projects in the North Sea later in the day.
Because ROCs are networked across multiple time zones, work can be handed over seamlessly between teams around the clock, helping to deliver insights and outcomes more quickly.
Remote responsibilitiesOne useful way of seeing remote operations is as a spectrum. Over time, operators may eventually oversee multiple vessels and project outcomes simultaneously, gradually shifting from direct control towards more of a monitoring and intervention role.
Importantly, remote operations do not mean the removal of responsibility. International maritime guidance already requires that every remotely operated vessel have a designated operator responsible for it, and that the operator can intervene when required.
The success of the offshore wind and broader marine engineering industry depends on rethinking traditional workforce models – bringing on board new talent skilled in data science, software engineering, and AI - as well as ensuring long-term sustainability in recruitment and talent retention.
Strategically embracing these changes will allow the marine and Geo-data industry to position itself for long-term success.
We've reviewed, rated, and ranked the best data recovery software.
This article was produced as part of TechRadar Pro Perspectives, our channel to feature the best and brightest minds in the technology industry today.
The views expressed here are those of the author and are not necessarily those of TechRadarPro or Future plc. If you are interested in contributing find out more here: https://www.techradar.com/pro/perspectives-how-to-submit
- Head to Have I Been Flocked? to see if you've been looked up
- You can read the details and reasons for each search
- Your license plate registration is deleted after the search is run
There's been an increasing level of pushback against Flock and its network of 120,000 or so license plate readers across the US in recent months, and if you want to know if your vehicle has been the subject of a search on Flock's system, there's a website just for that.
Head over to Have I Been Flocked? (via Dexerto), enter your license plate registration, and you'll get a report back. The site has amassed details of more than 241 million Flock searches, covering over 4.6 million license plates.
What's more, you can also see the reason that a plate was searched for — an auto theft or a traffic stop, for example. The site has a word cloud showing reasons for searches across the entire database, with words like "drugs" and "burglary" featuring prominently.
There's lots more to explore across the website as well, including audit reports, reports of non-criminal activities, searches run in partnership with US Immigration and Customs Enforcement (ICE), and data on where the license plate readers are clustered.
Data collection and privacyThere are over 120,000 Flock cameras across the US (Image credit: Getty Images)Have I Been Flocked? is the work of the independent editorial project Footnote4a, which reports on Flock's activities, the way that its technology is used, and the wider issues of mass surveillance and the privacy of citizens.
The extensive database has been compiled from audit logs released by local governments and Freedom of Information Act (FOIA) requests. It's not a complete history of Flock searches across every state, but it's still pretty comprehensive.
License plate registrations entered into the site aren't saved and are immediately deleted once the query is run. In addition, any sensitive personal information (like addresses) included in the audit logs is redacted.
"We believe mass surveillance has no place in a free society, and this data should not be collected to begin with," write the site's operators, adding that if it is collected, "warrants should be used" and "lookups should be rare" when accessing it.
Apple's 16-inch MacBook Pro is built for creative professionals who need considerably more power than an everyday laptop can hope to provide. And the 2026 MacBook Pro with an M5 Pro chip is currently discounted to $2760 (was $29990 at Amazon.
At a time when Apple has just increased prices across the board, that $239 is one worth jumping on. The M5 Pro chip has an 18-core CPU and 20-core GPU, backed by 24GB of unified memory and a 1TB SSD that is up to twice as fast as the previous generation. The laptop also supports Wi-Fi 7. In the UK, the M5 Pro MacBook Pro is down to £2746 (was £2999) at Amazon.
The 16.2-inch Liquid Retina XDR display remains one of the biggest reasons for creatives to choose the larger MacBook Pro. It can reach 1,600 nits of peak brightness and 1,000 nits of sustained brightness, with a claimed 1,000,000:1 contrast ratio.
Macbook Pro Laptop (2026) With Apple M5 Pro Chip: was $2999 now $2759.99
This 16.2-inch MacBook Pro combines an 18-core M5 Pro CPU, 20-core GPU, 24GB unified memory, 1TB SSD, Wi-Fi 7, Liquid Retina XDR display, and all-day battery life. Available at this price in both black or silver.
In the UK: now £2746 (was £2999)View Deal
Why we recommend itThe M5 Pro is the heart of the laptop and its 18-core CPU and 20-core GPU can handle even the most demanding workloads and hardware acceleration for AI which developers and creators running compatible models and tools locally will appreciate.
The 24GB of unified memory and 1TB SSD make it even more useful and the 16.2-inch Liquid Retina XDR display is beautiful with 1,600 nits peak brightness. Combined with the performance available whether you're plugged in or running from the battery, this is essentially a high-end desktop-class workstation you can carry with you.
Price context & historical valueAmazon has dropped this 16-inch M5 Pro MacBook Pro from $2,999 to $2,759.99, taking $239 (and a cent) off the regular price, or around 8%.
That's not an enormous percentage discount, but $239 is a solid reduction on a brand new high-end Apple laptop. It isn't the cheapest it's ever been however. That was $2,430 back in June, which was before Apple increased prices across its entire tech range.
Should you buy it?✅ Buy the 16-inch MacBook Pro if...
You need a laptop for creative workloads that can actually take advantage of the M5 Pro's considerable processing power. The combination of an 18-core CPU, 20-core GPU, and 24GB of unified memory gives you a machine that can handle pretty much everything you might want to throw at it.
The large 16.2-inch XDR display gives you considerably more working space than Apple's smaller laptops, and its high brightness and contrast make it particularly attractive for photo and video work.
❌ Skip the 16-inch MacBook Pro if...
If your workload doesn't require anywhere near as much creative power then a MacBook Air or less powerful MacBook Pro with the general M5 chip would make considerably more financial sense.
Portability is another consideration. The 16-inch MacBook Pro gives you a large workspace, but if you're constantly carrying your laptop between meetings, classes, or while traveling, one of Apple's smaller models will be far easier to live with.
The Catch: What to know before you buyEven with the discount, you're spending more than $2,700 on a laptop, so it only really makes sense if you'll benefit from the M5 Pro's performance, large XDR display, or professional capabilities. This is a powerhouse that people with advanced creative needs will benefit from, other professionals less so.
- France’s highest court has struck down a bill banning social media for teens
- Judges ruled the ban disproportionately infringed on freedom of expression
- This decision also pauses evaluation of VPN usage in France
France's highest constitutional authority, the Constitutional Council, has blocked a controversial bill that would have banned social media access for children under the age of 15. Initially slated to take effect this September, the legislation was struck down on August 14 after judges ruled it severely infringed on fundamental rights.
Alongside free-speech concerns, the court raised major red flags regarding the privacy of all French internet users. The sweeping age verification measures required to enforce the ban would have forced adults to hand over sensitive personal data just to access everyday online platforms.
The overturning of the bill is also a massive sigh of relief for anyone using the best VPN to protect their online privacy.
French officials had previously stated that cracking down on virtual private networks would be the next logical step to prevent tech-savvy teenagers from bypassing the social media block. With the primary law now dead in the water, VPN usage in France remains safe from this looming regulatory threat.
For everyday users, this means you can continue browsing, streaming, and securing your data without the immediate fear of a nationwide crackdown on encryption tools or mandatory ID checks across major networks.
A victory for privacy, but the fight isn't overIn its ruling, the Constitutional Council did not pull its punches. The judges found the government's approach to be far too broad, noting that the legislation failed to distinguish between different types of platforms or the actual risks they posed to children.
According to a BBC report, the Council ruled that the ban "constitutes an infringement that is neither appropriate, necessary, nor proportionate" to the freedom of expression and communication of young people.
The court further warned that enforcing such a ban would inevitably demand widespread identity checks, raising major concerns about the legal safeguards needed to protect citizens' right to privacy.
Because of these sweeping data collection requirements, the Le Monde report noted the Council determined the provisions were "a disproportionate restriction" on freedom of expression.
What this means for your VPN(Image credit: Getty Images)As we previously reported, the French government was openly preparing to heavily scrutinize consumer VPN providers. Because a virtual private network (VPN) encrypts your internet traffic and spoofs your IP address, it is the perfect tool for bypassing local network restrictions, something French lawmakers feared teenagers would inevitably use to circumvent the nationwide social media ban.
Had the bill passed, the government was poised to evaluate and potentially restrict VPN usage, which could have led to aggressive app store removals or outright blocking of encrypted traffic.
Now, this constitutional roadblock means privacy advocates and cybersecurity enthusiasts can breathe easy. Without the foundational social media ban, the political momentum to regulate consumer security tools has stalled.
However, President Emmanuel Macron is not giving up on his flagship digital policy. In response to the court's decision, Macron told the Associated Press he has tasked Prime Minister Sébastien Lecornu "with working as quickly as possible on a legally robust proposal that takes into account the decision of the Constitutional Council as well as the European legal framework."
We will continue to monitor the situation, but for now, your digital privacy tools remain entirely unhindered in France.
If you're looking for a portable power station that can keep essential equipment running through an outage or provide electricity on a road trip, I've found a huge $470 discount on the Bluetti Elite 100 V2 with a 100W solar panel for $629 (was $1099) at Amazon.
The Elite 100 V2 packs a 1024Wh LiFePO4 battery into a relatively compact 25-pound unit and delivers 1800W of continuous AC output. It can power up to 11 devices simultaneously, and Bluetti rates the battery for more than 4,000 cycles. It can reach 80% charge in around 45 minutes and fully recharge from AC power in about 70 minutes.
This bundle also includes a 100W solar panel, giving you a way to boost the battery when you're camping or away from the grid. A full solar charge lasts around seven hours, under suitable conditions obviously..
Solar Generator Elite 100 V2 With 100w Solar Panel, 1024wh 1800w: was $1099 now $629
This 1024Wh LiFePO4 power station delivers 1800W AC output, powers up to 11 devices, supports fast AC charging and 10ms UPS backup, and includes a 100W solar panel.View Deal
In his four-star review of the Elite 100 V2, our expert Jack called it a "small, light-weight, portable yet powerful power station" and liked that it is quiet when fans are running, has a very good app and high wattage output.
The Elite 100 V2 strikes a useful balance between capacity, output, and portability. At 25 pounds and around 12.6 x 8.5 x 9.8 inches, it's reasonably manageable for a 1kWh-class power station, with a hidden handle making it easier to carry.
The UPS function can switch over in 10ms or less during a power failure, helping keep equipment such as a PC or Wi-Fi router running. Bluetti also rates operating noise as low as 30dB, which should make it less intrusive indoors.
An AC connection can take the battery to 80% in around 45 minutes and fully recharge it in roughly 70 minutes, so you don't have to leave it plugged in for most of the day before it's ready to go.
For more options, take a look at our roundup of the best portable power stations.
Price context & historical valueThe Bluetti Elite 100 V2 and 100W solar panel bundle is currently reduced from $1,099 to $629, a $470 cut of around 43%.
This isn't the lowest price we've seen it however. The bundle was reduced to $550 in November 2025, for Black Friday, making the current deal $79 more expensive than that previous low.
It's still a large reduction from the listed price though, and we'd definitely recommend considering buying it now.
Should you buy it?✅ Buy the Bluetti Elite 100 V2 if...
You want a portable power station that can cover camping trips, road trips, and emergency backup duties at home. This model's 1024Wh capacity is more than enough for charging your various devices. The 1800W continuous output also allows it to run a wide range of household equipment.
The included solar panel will make the bundle especially appealing for camping and off-grid use. You can boost the battery without access to mains power, and the panel is included rather than being an additional purchase.
❌ Skip the Bluetti Elite 100 V2 if...
You only need something to keep phones, tablets, and other small electronics charged. A 1024Wh power station has more capacity than those jobs require, and a smaller model will be cheaper and considerably lighter.
The included 100W solar panel also isn't particularly powerful compared with the capacity of the battery. Bluetti quotes around seven hours for a full solar recharge under suitable conditions, so anyone relying heavily on solar power may want a higher-output compatible panel.
The Catch: What to know before you buyThe 100W solar panel ships separately from the power station, so don't be concerned if the entire bundle doesn't arrive in a single delivery.
It's also worth distinguishing between the various power figures in the listing. The Elite 100 V2 provides 1800W of normal AC output, while Bluetti also lists higher figures for Power Lifting and surge capability. Those shouldn't be treated as the amount of continuous power available for everyday use.
Artificial intelligence is rapidly reshaping cybersecurity. Much of the conversation has focused on how large language models are helping developers write code, but a more significant shift may be occurring elsewhere: security testing.
AI systems are becoming remarkably effective at identifying vulnerabilities, forcing organizations to rethink how they evaluate the security of both software and hardware products.
The reason lies in the nature of modern software. Large codebases are sprawling ecosystems of interconnected modules, third-party dependencies, legacy components, and undocumented assumptions.
Security flaws often emerge not from a single defective function, but from subtle interactions between components that may be separated by hundreds of files or years of development history. Human reviewers excel at deep analysis, but they are constrained by time and cognitive bandwidth.
AI systems, by contrast, can rapidly traverse vast amounts of code, correlate information across repositories, and identify patterns associated with known vulnerability classes.
Common software weaknessesThis capability is particularly powerful for common software weaknesses such as memory-safety issues, race conditions, authentication flaws, insecure API usage, and privilege-escalation paths. In many cases, AI is acting as an amplifier for established security techniques rather than inventing new ones. Yet the result is still significant: vulnerabilities that previously required substantial manual effort to uncover can now be identified at a much greater scale and speed.
The implications for product security are profound. Organizations can no longer assume that obscure vulnerabilities will remain undiscovered because finding them is too expensive. The cost of vulnerability discovery is falling, and it is falling for defenders and attackers alike. Security testing therefore becomes less about achieving a point-in-time assessment and more about maintaining continuous assurance throughout the development lifecycle.
However, it would be a mistake to assume that all areas of cybersecurity will be transformed equally by AI. Hardware security, particularly side-channel analysis of cryptographic implementations, presents a very different challenge.
Unlike general-purpose software systems, cryptographic implementations operate within a comparatively narrow and mathematically defined problem space. Side-channel attacks do not typically exploit unexpected program behavior or complex interactions between software components. Instead, they target subtle information leakage through physical phenomena such as execution timing, power consumption, or electromagnetic emissions.
The challenge is not understanding millions of lines of source code; it is extracting meaningful signals from carefully collected measurements and applying sophisticated statistical techniques to reveal hidden secrets.
Side-channel analysisThis distinction matters because many of the strengths that make large language models effective in software security are less relevant in side-channel analysis. LLMs excel at connecting information across large bodies of text and code, identifying relationships that humans may overlook.
Side-channel research, by contrast, already relies heavily on structured datasets, statistical processing, signal analysis, and deep domain expertise. AI can certainly accelerate parts of the workflow—from automating experimentation to assisting with data interpretation—but the advantage is typically more incremental than transformational.
That does not make hardware security less important. If anything, it highlights the need for specialized testing approaches. As AI lowers the barriers to software vulnerability discovery, organizations may be tempted to assume that automated tools alone can provide comprehensive assurance.
The reality is that different classes of vulnerabilities require different forms of expertise. An AI-assisted code review may uncover a memory corruption bug, but it is unlikely to replace the specialist knowledge required to evaluate whether a cryptographic implementation leaks secrets through power analysis.
The broader lesson is that security testing is becoming more important, not less. AI is increasing the speed at which vulnerabilities can be found, but it is not eliminating the need for expert analysis. Instead, it is changing where that expertise delivers the most value.
Organizations that combine AI-assisted testing with rigorous human-led security evaluation will be best positioned to address the evolving threat landscape—whether the target is a cloud application, an embedded device, or the cryptographic hardware that underpins digital trust.
We've reviewed, rated, and ranked the best internet security suites.
This article was produced as part of TechRadar Pro Perspectives, our channel to feature the best and brightest minds in the technology industry today.
The views expressed here are those of the author and are not necessarily those of TechRadarPro or Future plc. If you are interested in contributing find out more here: https://www.techradar.com/pro/perspectives-how-to-submit
- Gears of War creator Cliff Bleszinski said, "It's not cool to like something" anymore in a recent Facebook post
- He thinks players' "minds are made up" before a game is even out, with some titles falling victim ot "dogpiling"
- He listed Highguard and the upcoming Horizon Hunters Gathering as examples
Gears of War creator Cliff Bleszinski has lamented the current online culture where players' "minds are made up" before a game is even out, thanks to the "dogpiling" of certain titles like Concord, Highguard, and the upcoming Horizon Hunters Gathering.
In a recent Facebook post, Bleszinski, who was lead designer of the first three Gears of War games, said that he had been "sucked into the rabbit hole of takes on Concord's failure" while browsing YouTube.
A live-service hero arena shooter, Concord launched in 2024 and was an unprecedented flop. Its servers were shut down after just two weeks thanks to catastrophically low sales, with the few buyers refunded. Sony shut down its developer, Firewalk Studios, the next month.
Bleszinski wrote that there is "no lack of videos trying to pin the blame on a variety of factors" like "hero shooter fatigue, ugly character designs, timing, long dev cycle." This apparently led him to videos about the subsequent failure of Highguard, a free-to-play hero shooter that came out earlier this year and was shut down after just 45 days, having struggled to maintain a player base.
He argued that "gamers glommed onto" Highguard, branding it "the next Concord" before it had even come out. "I honestly thought Highguard looked pretty good," he continued, though he admits he was skeptical whether it had a strong enough unique selling point to succeed.
"Betting on 'well now you ride a horse' as a unique selling point for a title didn't make a lot of sense to me, just like 'well you fight in low gravity' wasn't enough for LawBreakers," he said, referring to the unsuccessful sci-fi hero shooter he himself directed that released in 2017 and shut down a little over a year later.
"In some of these hit piece videos I kept seeing glimpses of a really cool-looking title that I couldn't pin down until I located it," he added. The game in question was Horizon Hunters Gathering, an upcoming co-op Horizon Zero Dawn spinoff.
"I loved Horizon and I thought this looked really compelling; I dug the art style and a PvE game in that world seems like a good fit," he wrote. "And then I read the comments. [...] It was a nonstop barrage of wanting to hate something long before it even hit."
He added: "The new world order we live in is one of 'didn't have a chance before it even came out' - minds are made up before the title even ships and folks get a chance to play it and decide for themselves. The dogpiling is real. I can't imagine being a dev and seeing this."
To wrap up, he stated: "I get it. It's not cool to like something. And, if something becomes loved, it then becomes cool to hate it." He also questioned how this situation came about, though he didn't offer any definitive conclusion.
You might argue that titles like Highguard failed to compete in a crowded market due to a lack of quality, though I think it's still easy to see what Bleszinski is talking about. Upcoming games, particularly new live-service titles, often face a barrage of negative online sentiment on platforms like X and YouTube, which threatens to dominate the conversation surrounding them in the build-up to launch.
Whether the endless videos lambasting Horizon Hunters Gathering will dramatically affect the sales of the game is to be seen when it launches for PlayStation 5 and PC in the future.
We've been internally holding the news that Outer Banks seasons 5 was going to be the end of Netflix's hit teen action drama for a lifetime (or that's what it feels like), but now, the end is here.
The Pogues will reunite one last time while still grieving in the aftermath of everything that went down in Morocco. Now that JJ is dead, they're actively seeking revenge against Chandler Groff while still hunting the legendary Blue Crown.
The final farewell will surely be explosive, but when does Outer Banks season 5 actually hit Netflix?
What time can I watch Outer Banks season 5 on Netflix?Outer Banks season 5 drops on Thursday, August 20.
As for exact time, it should be the standard 12am PT / 3am ET release time that practically every other Netflix TV Original has.
For fans who don't live in North America, here's when you'll need to tune in for season 5:
- US – 12am PT / 3am ET
- Canada – 12am PT / 3am ET
- UK – 8am BST
- India – 12:30pm IST
- Singapore – 3pm SGT
- Australia – 5pm AEST
- New Zealand – 7pm NZST
All 10 episodes of this season will be released at the same time. Unlike weekly drops on the likes of Prime Video, Apple TV, and Disney+, then, you won't need to wait around for new installment of Outer Banks season 5.
As we've already touched on, this will be the final installment of the Netflix series, too, so there won't be another season after this one.
This week, OpenAI added Google Drive to your ChatGPT Library. You could already connect to Google Drive, but now it means you can select a whole Drive folder and ask ChatGPT to look for answers working across all the files it contains.
This can save a lot of time compared to uploading each file individually to ChatGPT’s library and asking ChatGPT to work with it, especially for working with images. Now they’re effectively all in there already.
Now, I don’t know if you’re anything like me, but I tend to treat the root folder of my Google Drive like a very messy desktop. I’ve had my Google account for years, and I just chuck files in there without really organizing them into folders unless I really have to.
The result is that it has built up into one big mess of old and new files floating about in a kind of digital soup. I’m sure there are important things in there that I’m at risk of forgetting about forever.
So, when I heard that ChatGPT can now look at the documents your Drive folder contains and organize them for you too, I was intrigued.
10 years of junkTo test this out, I thought I’d ask ChatGPT to connect to my Google Drive and take a look at what it could find:
“I've got a load of files in my Google Drive that aren't in folders — go through everything here and identify things I’ve forgotten, unfinished tasks, contradictions, deadlines, duplicate work and anything that looks like it still needs action. Also suggest how it could be organized and what files should go where.”
The result was impressive. It thought for what felt like about 30 seconds, then came back with some results. I had to re-authorize it to connect to my Drive a couple of times first, but everything went smoothly.
It turns out that I have a real penchant for saving files called “Untitled document” into Drive. Chat was able to go through them all and work out what they were about and what was important.
It found a lot of material from various books I’d been writing and suggested how to organize them together. Old invoices were also collected, and there were a lot of forgotten idea fragments that it thought were worth reviewing.
It also found duplicate files and multiple versions of “household_budget_tracker”. Sadly, I never got that project off the ground!
A better structureThe whole process led me to discover things from the last 10 years that I’d pretty much forgotten about, and Chat suggested a folder structure for me to use to keep them more organized. Its ability to spot half-finished ideas and documents from years ago was incredibly useful. In particular, it found the outline of a book I'd started in 2018 and hadn't thought about for years. I've actually started looking at a few of those old writing projects again because of it.
But analyzing the mess and proposing a structure isn’t the only trick ChatGPT can do. I discovered it could actually make those changes itself. Just tell ChatGPT to create a new folder and put a load of files into it, and it will actually do it. So, for example, I asked, “Can you make a folder called Invoices and put all my invoices in there?” All this was possible from within ChatGPT, and I didn’t even need to touch Google Drive myself.
Sadly, the new features aren’t available to ChatGPT Free or Go users. You’ll need a Plus, Pro, or Business account. Another new feature is that it can keep Docs, Sheets, and Slides from your Drive open alongside the conversation while you interrogate them, but today I was more interested in how ChatGPT could help me organize the mess that is my Google Drive.
Seeing ChatGPT casually surface abandoned writing projects from years ago was a slightly strange experience, but I finally feel like I’ve cleaned out my digital junk drawer and got a handle on 10 years of clutter. Perhaps the most useful thing ChatGPT did wasn't organizing my Google Drive. It made the fact that I hadn't organized it properly for the last decade matter a lot less.
- GPU price hikes are coming later this year, PC Partner Group warns
- The parent company of Zotac notes that entry-level GPUs will suffer 'more severe shortages'
- A manufacturer of gaming monitors, KTC, has also warned on price hikes
PC gamers should be aware that there are further signs that GPUs could get more expensive, and gaming monitors too, so you might want to consider buying now rather than waiting.
First off, the gloomy GPU news which comes from PC Partner Group (PC PG), an Asian graphics card giant based in Singapore and the parent company of Zotac, Inno3D, and Manli.
VideoCardz reports that PC PG just published its latest fiscal results that came with a warning on GPU pricing as part of the trends and conditions which are likely to affect the company's finances in the upcoming year.
PC PG notes that "graphics memory costs are expected to rise further, leading to a substantial increase in VGA Card costs in the second half of the year." VGA Card simply refers to discrete PC graphics cards, and although it's a well outdated term now, it's one still used behind the scenes in the industry.
PC PG says that shipments of GPUs "declined substantially" in the first half of this year, and that they're likely to drop further in the second half of 2026. The firm writes that: "Beyond the price increases, entry-level VGA Cards are expected to face even more severe shortages, which may further drive ASP [the 'average selling price'] upward in the second half of 2026."
The company also highlights that other PC components, including system RAM and CPUs, are taking longer to get hold of.
VideoCardz also noticed that monitor pricing could be on an upward trajectory, too, as manufacturer KTC has issued a notice of a likely 'product price adjustment' in the future.
KTC observes that the "production cost of monitors has increased significantly" and that it can no longer absorb those pressures, therefore: "KTC's monitor product line may see a price increase in the future."
While that's just a 'may' rather than a 'will' or a certainty, it sounds like there's a high likelihood of it happening. Particularly because KTC advises: "For users with a clear need to purchase a device [monitor] in the near future, the current pricing window offers excellent value for money, and we recommend planning your purchase time accordingly."
And at the end of its statement, KTC talks about price adjustments being a "necessary measure", so it sounds pretty much like they're coming no matter what.
Analysis: is anything immune to the component crisis?(Image credit: Alastair Jennings)This isn't the only warning on monitor price increases, as AOC recently said that the rising cost of components for its products will mean price hikes starting from this month. Is this the start of a growing trend? The bigger monitor producers will, of course, have more financial wherewithal to weather component rises, but it may only be so long before even those firms start to jack up prices.
The way things are going, I wouldn't bet against it, and this latest news has people on social media asking what isn't immune to the RAM crisis – and what might we expect to see hit next?
How about pricier PC cases, one Redditor jokes: "Wouldn't you enjoy a simple case costing like $300?"
The crisis does feel rather relentless at this point, but the clearest worry is now GPUs. PC Gamer is tracking graphics card prices on a weekly basis, and there have been some clear cost increases coming through in the last few weeks, which suggests that PC PG's prediction is on the money here. And there are multiple other rumors of late warning that graphics cards are set for considerable price hikes. For me, this noise is becoming too consistent to ignore.
As I recently advised, if you need a graphics card upgrade, or think you will in the next year or two, I believe now is the right time to get in and buy. It's particularly notable that according to this latest rumor, entry-level GPUs are mentioned as apparently coming under more pressure, meaning that mainstream buyers are going to be suffering.
The effects of pricier video RAM, and other pressures besides, are no longer going to be mostly about high-end (or 16GB) cards becoming ridiculously expensive, and we could see some unfortunate hikes with lower-end GPUs.
There's very little good news of late across the gamut of PC components, and as we've already seen today, RAM and SSDs are getting even more expensive.
- CVE‑2026‑65400 macOS Screen Sharing flaw exploited for cryptojacking within days of disclosure
- Attackers gained root via exposed port 5900 and deployed Monero miners using XMRig
- Apple patched in Sequoia 15.7.9, Sonoma 14.8.9, Tahoe 26.6.1; users urged to update immediately
Less than a week after being publicly disclosed, a macOS vulnerability plaguing Screen Sharing was observed as being used in cryptojacking attacks.
Alfredo Pesoli, a security researcher from Bynario, discovered an authentication issue in macOS Screen Sharing and reported it to Apple. Screen Sharing is a built-in macOS tool that allows users to remotely connect, and use, another Mac device. It is similar to third-party tools such as AnyDesk or TeamViewer and comes in rather handy for IT teams accessing Macs stored in closets or used by remote and home-working employees.
The bug allows a remote attacker to bypass authentication and gain access to a vulnerable Mac device without valid credentials. It apparently stems from a logic issue in the Screen Sharing server’s authentication process, affecting systems where the service is exposed to the internet.
The Netherlands issue a warningSoon after disclosure, Apple released an out-of-bound fix, signaling that this is, indeed, a dangerous vulnerability. “Apple does not ship an update out of band unless something is critical,” security researchers Calif said in their technical writeup. The National Vulnerability Database (NVD) assigned it an identifier - CVE-2026-65400 - and gave it a severity rating of 9.6/10 (critical).
Approximately at the same time the patch was released, the flaw was also showcased at the 2026 Black Hat conference, with a video demonstration was made public a few days later.
Apple said it fixed it with improved state management, addressing the bug in macOS Sequoia 15.7.9, macOS Sonoma 14.8.9, macOS Tahoe 26.6.1.
Now, less than a week after the disclosure, researchers are saying the bug is being leveraged in actual cyberattacks, with Dutch security officials being first to react
“The NCSC has received a report showing that active abuse of this vulnerability has been observed on several systems on which port 5900 was accessible from the internet,” the Netherlands National Cyber Security Centrum (NCSC) said in a machine-translated report. “In all these cases, root access was gained on the affected system and a Monero crypto miner was placed.”
Why Monero?Monero is considered an “altcoin” - a cryptocurrency built as an alternative to Bitcoin. It is one of the oldest active altcoins out there, having been launched more than 12 years ago. Most cryptocurrencies rarely live through a single four-year bitcoin cycle but Monero, just like Ethereum, Litecoin, Solana, and a handful of others, endures.
It is similar to Bitcoin because it, too, can be “mined” (unlike Ethereum, for example). It differs on the privacy front. Unlike Bitcoin, whose transactions are recorded on a public ledger and can often be traced, Monero is designed to obscure the sender, recipient, and the amount of transactions. This privacy feature has, unfortunately, also attracted criminals.
Another key feature that made crooks choose Monero for their cryptojackers is the fact that the altcoin uses a proof-of-work (mining) algorithm optimized for general-purpose CPUs, making mining relatively profitable on ordinary servers, desktops, and cloud machines.
Although it was not specifically stated, it is safe to assume that in this incident, the attackers were deploying XMRig. It is, by far, the most popular cryptojacker and one that mines primarily Monero (its ticker is XMR).
How to stay safeThe best way to go about it is to install the patch Apple just released. This effectively plugs the hole and makes the device secure. Those who are unable to deploy the patch immediately should block Screen Sharing and enable it only when it is actually needed and used. To do that, users can go to System Settings > General > Sharing and toggle the Screen Sharing switch off.
Finally, it is worth mentioning that the NCSC stressed the crooks could only exploit the flaw when the target device’s port 5900 is exposed to the internet. Therefore, setting routers and firewalls to block the port can also work, although we’d only recommend it as a last resort. Installing the patch is still the best way to go.
Right now, no groups claimed responsibility for this attack, and there is no evidence it is being used for anything else. In theory, though, it can also be used for data exfiltration, malware deployment, and possibly even ransomware attacks.
Hard drives remain one of the most affordable ways to add terabytes of storage to a PC, server, or NAS, particularly where speed isn't a priority. The 4TB Seagate IronWolf (ST4000VN006) hard drive is currently $187 (was $280) at Newegg.
This is a standard 3.5-inch SATA hard drive that can be installed in a compatible desktop, workstation, server, or enclosure. What you get over a basic desktop drive is hardware and firmware designed to cope particularly well with continuous operation and multi-drive NAS environments.
It offers CMR recording, a 5400 RPM spindle speed, 256MB cache, and SATA 6Gb/s interface. It's rated for 24/7 operation and workloads of up to 180TB per year. Seagate's AgileArray technology is designed to improve reliability and RAID performance in compatible multi-bay systems.
4TB Ironwolf SHard Drive: was $279.99 now $187
This Seagate IronWolf HDD provides 4TB of CMR storage, a 5400 RPM spindle speed, 256MB cache, SATA 6Gb/s connectivity, 24/7 operation, and a 180TB/year workload rating.View Deal
In his 4-star review of the 8TB model (ST8000VN004), our expert Mark said: "IronWolf drives feature CMR technology and AgileArray firmware, ensuring smooth RAID performance, reduced vibration, and efficient power management. The 180TB per year workload rating, the RV sensors, the three-year warranty, and the bundled Rescue Data Recovery Services have all persisted as defining features of the consumer tier."
Flexibility is a huge part of the HDD's appeal. Its standard 3.5-inch SATA interface means it can provide conventional storage in compatible PCs and other systems, and its NAS-specific features are particularly handy when it's running continuously or alongside other drives.
CMR recording means it's well suited to sustained writing and RAID environments, and the 180TB/year workload rating makes the drive better equipped for heavier storage duties than a typical everyday HDD.
You also get Seagate's IronWolf Health Management on supported NAS hardware, which can provide drive-health monitoring and recommendations. Seagate includes three years of Rescue Data Recovery Services as well, although availability varies by country.
For more options, take a look at our roundups of the best desktop and laptop hard drives and best NAS hard drives.
Price context & historical valueNewegg has slashed the price from $279.99 to $187, a $92.99 saving, equivalent to roughly 33%. This isn't the lowest price we've ever seen for the ST4000VN006, which has sold for considerably lower in the past (it was $169.99 in May of this year), but it's still a solid offer.
Should you buy it?✅ Buy the Seagate IronWolf 4TB if...
You need plenty of inexpensive storage for files that don't require SSD speeds. 4TB gives you a decent room for photos, videos, backups, documents, games, and other large collections.
It's an even stronger fit if that storage finds its way into a NAS. IronWolf drives are designed specifically with always-on and multi-bay environments in mind, so you can use this as an ordinary storage drive today without ruling out a NAS or home-server role later.
❌ Skip the Seagate IronWolf 4TB if...
You need high-speed primary storage for Windows, applications, or workloads that constantly move large amounts of data. A 5400 RPM mechanical drive can't compete with an SSD for speed so its strengths are capacity, and continuous operation.
4TB might also be too small if you're filling a NAS with a limited number of bays. A four-bay system populated entirely with 4TB drives will give you just 16TB of raw capacity before accounting for RAID, so larger drives could make more sense depending on your personal needs.
The Catch: What to know before you buyThis is a 5400 RPM mechanical hard drive, so will be good to use for bulk storage, backups, media libraries, servers, and NAS duties rather than something where a speedy SSD would be a smarter choice.
If you are buying it specifically for a NAS, check the manufacturer's compatibility list for the drive before ordering. Compatibility between a particular NAS enclosure and individual drive models shouldn't be assumed.