News

• Accomplish AI showed Claude Cowork could escape a VM sandbox via Linux zero‑day CVE‑2026‑46331
• Agent accessed host Mac files, risking exfiltration of SSH keys, cloud credentials, and more
• Anthropic shifted Cowork to default cloud execution; local users must harden configs to mitigate exposure

Recent news of a ChatGPT agent escaping the sandbox and attacking services on the internet raised quite a few eyebrows, but it seems it’s not the only one capable of running wild. Security researchers Accomplish AI are saying they achieved similar results with Anthropic’s Claude Cowork.

In a new report, the researchers said they ran a local session in a Mac-hosted virtual Linux machine and then observed as the agent broke free of the VM and started reading and writing files on the underlying system.

“We connected a folder to a fresh Claude Cowork session, sent one short message, and watched the agent escape the sandbox,” Oren Yomtov, principal security researcher at Accomplish AI, told The Hacker News. “From inside the VM, it reached the host Mac and read and wrote files all over it, far outside the folder we'd connected, with no permission prompt anywhere.”

This means that, in theory, the agent can be used to access or exfiltrate anything that’s stored on the Mac’s user account, including SSH keys, cloud credentials, and more. To break out of the sandbox, the agent exploited CVE-2026-46331 ("pedit COW"), a Linux kernel privilege-escalation vulnerability. This flaw, fixed in mid-June this year, was given a severity score of 7.8/10 (high).

Accomplish AI disclosed these findings with Anthropic, which allegedly acknowledged them but did not issue a direct fix. However, the version of Claude Cowork that was released afterwards defaults to cloud execution which, the publication claims, addresses the issue. Still, users who opt to run the agent locally rather than in the cloud will remain exposed.

Mitigations are possible, though. Users should disable unprivileged user namespaces, grant/revoke seccopm permissions, stop modules autoloading, and restrict sharing of the whole host into the VM.

"Scope it to the folders that were actually connected instead of all of /, or at least mount it read-only, and run coworkd with ProtectSystem=strict in its own mount namespace so it isn't re-execing binaries a session user can poison," Accomplish AI explained. "Then even a full guest-root has nothing to land on, the last two steps of the chain have nowhere to go."

The GameSir G8+ Bluetooth is the wireless mobile controller in the G8 family and bolsters compatibility from being simply mobile, to the Nintendo Switch, tablets, and PC. The same full-size grips, Hall effect joysticks and triggers, and programmable back buttons that made the wired versions of the G8 so impressive remain, and at $79.99 / £79.99 / AU$129, so does the price.

On paper, you’d think it’s a no-brainer to go wireless, particularly with the addition of a six-axis gyroscope adding to that strong core experience, but the wireless freedom you gain comes with meaningful trade-offs. Noticeably, the lack of passthrough charging and the lack of a headphone jack, both obvious casualties of the move to Bluetooth.

More importantly for iPhone gamers, the GameSir iOS app doesn't recognize the controller, which means the stick calibration, dead zone tuning, hair-trigger configuration, and back button mapping that make the G8 Plus so compelling as an option on other platforms go completely to waste. The Bluetooth connection itself also feels less locked-in than the wired experience on iPhone, with small stick movements occasionally getting lost along the way.

On Android and PC, the experience is significantly better. The app works, the back buttons are configurable, and there’s haptic feedback on offer as well (albeit with patchy support, particularly on mobile). For the first time, you can even use the G8 Plus with your Nintendo Switch. But if an iPhone is your primary device, the wired GameSir G8+ MFi delivers a more complete, more reliable experience for the same money.

• List price: $79.99 / £79.99 / AU$129
• Available from GameSir and major retailers
• Same price as the rest of the G8 range

The middle sibling, the GameSir G8+ Bluetooth launched in mid-2024 at $79.99 / £79.99 / AU$129, matching the rest of the G8 family.

Each variant has pros and cons, so the consistent price puts the onus firmly on the buyer to decide which set of trade-offs works best for their setup. GameSir has also released a couple of special edition color variants in some regions, including a Hulk and a Thanos Edition, which will set you back slightly more.

At this price, it remains highly competitive against the Backbone One 2nd Gen and is significantly cheaper than the Razer Kishi Ultra, though the Bluetooth limitations on iPhone mean it's not the straightforward recommendation the wired models are.

GameSir G8+ Bluetooth

Price

$79.99 / £79.99 / AU$129

Dimensions

9.06 x 4.21 x 2.17 in / 230 x 107 x 55mm

Weight

0.69 lbs / 314g

Connection

Bluetooth 5.3, Wired USB-C (PC), Wireless Dongle (sold separately)

Compatibility

iOS, Android, Nintendo Switch, PC, macOS

Software

GameSir App (Android only)

• Comfortable, console controller-like ergonomics shared with the rest of the G8 range
• Bluetooth versatility across five platforms, but mode switching is a hassle
• Special edition designs are only available in certain markets

The G8+ Bluetooth is the first and only member of the G8 family that cuts the cord entirely. Wireless freedom and the versatility it brings are the entire pitch, and it helps broaden the G8’s platform compatibility too.

Unlike the original G8 Galileo and the G8+ MFi, which are limited to mobile only, this controller works with iOS, Android, the Nintendo Switch, PC (via wired USB-C or Bluetooth, with a wireless dongle sold separately), and macOS. Console gaming aside, in theory, that means the G8+ is ready to follow you anywhere on your gaming journey.

The reality, unfortunately, is a little more complicated. Each platform requires its own Bluetooth pairing mode, triggered by holding different button combinations on the controller. If you're a one-device person, this is a simple pair-once-and-forget situation, and you can skip to the next paragraph.

If you're hopping between platforms, as I was during testing, it gets tedious fast. Switching modes caused regular reconnection failures with devices the controller had previously been paired with, and keeping track of which mode goes with which platform isn't intuitive. It's workable, and we’re in first-world problem territory here for sure, but it's not the seamless experience it should be.

On the plus side, turning it on couldn’t be simpler because stretching the controller open automatically powers it on and letting it close fully again powers it down. This isn’t a life-changing feature but certainly a nice convenience that worked reliably throughout testing.

A 1000mAh battery sits split across both grips, charging via USB-C. The GameSir app tracks each side independently, which is how I discovered the left and right grips drain at slightly different rates despite charging as a single unit. I saw a couple of percent drop over half an hour of active use, and the rated eight-hour battery life seems about right based on that.

The black colorway is a clean, classic look that feels more like a traditional controller than the grey and grey-and-white of its wired siblings. GameSir has also released rather jazzy Hulk- and Thanos-themed special editions in some regions, making this the only G8 variant with cosmetic variety, though they’ll set you back a little more for the paint job.

The build quality and overall shape match the rest of the family; it’s well designed and well built with the same full-size, Xbox-like grips, textured backs and a solid chassis. It’s comfortable to hold for extended sessions, and while at 11oz/314g it's the heaviest of the three on paper, the balance is good, and the weight didn't register during testing.

Case compatibility is a mixed bag, as is often the case with mobile controller grips. Without a USB-C connector going into the phone, there's no port angle to stress about, thankfully, but the physical cradle can still be tight.

My iPhone 17 Pro fit with a slim case on but sat at a noticeable angle towards the left side, which saw it protrude more than I’d like. There is a rubber pad on the phone deck that appears to serve the same purpose as the G8+ MFi's removable magnetic panel for camera bump clearance, but this one is glued down rather than magnetically attached.

GameSir’s marketing suggests this is still meant to be removed to accommodate camera bumps, but it really didn't feel like it wanted to come off, and I wasn't willing to force it. If you do take it off, don’t expect it to go back on neatly and expect to trap plenty of dust in the residue.

The D-pad shares the same feel as the rest of the G8 family: slightly mushy initial movement but with a clicky, short-travel feel once you commit to an input. Swappable ABXY caps and thumbstick caps carry over, too, as do the three alternate stick options, and they’re easily adjusted by popping off the magnetic faceplates.

Once again, however, GameSir only includes one of each of these replaceable sticks, so you can’t run the same option on both sides. One annoyance that cropped up here for the first time on any G8 I’ve tested: on iOS, the controller connects as a DualShock controller, so all on-screen UI elements in compatible games display PlayStation button labels.

GameSir doesn't include any PlayStation-legended alternative keycaps in the box, so you’ll need to remember that triangle is Y, for example.

• Hall effect inputs are excellent and responsive, but Bluetooth feels a step behind wired
• iPhone users lose app support, back buttons, and customization entirely
• Vibration motors remain largely a spec-sheet feature with no real-world use

As you’d expect, the core gameplay experience with the G8+ Bluetooth mirrors the other options in the G8 range. The Hall effect thumbsticks and triggers are smooth and precise with a high level of sensitivity.

Resistance in these is just right for my taste; I found I was able to confidently hold the sticks at a midpoint for fine adjustments without the sense that the stick was itching to return to its starting point. The triggers offer full analog travel with a responsive hair-trigger mode (assuming you can enable it, more on that shortly). In analog mode, I felt like I had a nice level of control and was able to modulate the throttle in Forza Horizon 6 with plenty of detail.

That said, the Bluetooth connection introduced a subtle but noticeable difference in feel I hadn’t experienced before with a GameSir G8. I couldn’t quite quantify it, but I didn't feel as locked-in using the G8+ Wireless as I did with the wired equivalents.

It's not consistent, obvious latency, or any kind of genuine stutter or interference; it's more that small thumbstick movements occasionally felt like they were getting lost along the way. Everything was perfectly playable, and my skill as a gamer is certainly not high enough for this to be a make-or-break thing, but if you're serious about your gaming, the wired experience is definitely tighter.

The biggest issue I came across, and the one that separates this controller from the rest of the G8 family, is the iPhone experience. It’s somewhat lacking. Because iOS sees the controller as a DualShock 4, the GameSir app doesn’t recognize the G8+ Bluetooth. That means no stick calibration, no deadzone adjustment, no hair-trigger toggling, and no back button mapping.

The two rear programmable buttons, labeled M1 and M2, ship unbound by default, and there's no way to configure them on iOS. They don't appear in the iPhone's native controller settings either because iOS thinks this is a DualShock 4, which doesn't have back buttons. On macOS, I was able to rebind other buttons through native system options, but back button mapping wasn't available there either for the same reason.

On Android, the picture is much better. The app recognized the controller (though admittedly it took a couple of attempts at first), and once connected, all the usual calibration, deadzone, hair-trigger, and back button configuration options were available. Gaming on the POCO X5 Pro was a smooth experience, with Fortnite and Call of Duty Mobile both running well after the usual game-side controller recognition quirks.

PC gaming was the most pleasant surprise. Connected via either USB-C or Bluetooth, the controller was recognized immediately as a PlayStation 4 controller and was fully mapped out of the box for both local and cloud gaming. Gyro tracking worked here too, which is a nice bonus for games that support it. On macOS, things were less smooth.

The controller initially tried to connect as a "GameSir G8" which required manual Steam configuration and then wasn't recognized in-game. Reverting to DualShock mode fixed the issue, and games worked with automated mapping after that.

You're an Android user who wants one controller for phone, Switch, and PC
The Bluetooth versatility and full GameSir app support on Android make the G8+ Bluetooth a seriously flexible, wireless option. If you play across multiple platforms and want a single controller to handle them all, this could well be it.

You value wireless convenience over raw precision
No connections mean a simpler experience and fewer points of failure. It also brings a wider variety of devices into play.

You're primarily an iPhone user
While it does work natively for games that play nicely with a physical controller, the lack of GameSir app support, non-functional back buttons, and DualShock workaround make the iPhone experience feel like an afterthought. The wired G8+ MFi is the better choice for the same money and with little drawback.

You want the tightest possible input response
Don’t get me wrong, the Bluetooth connection is perfectly playable, but it doesn't feel as precise and instantly responsive as the wired G8 controllers. If competitive precision matters to you, go wired.

Trying to work out if the GameSir G8+ Bluetooth is the one to get? Here's how it compares to other, similar controller grips.

GameSir G8+ Bluetooth

GameSir G8+ MFi Galileo MFi

Scuf Nomad

Price

$79.99 / £79.99 / AU$129.99

$79.99 / £79.99 / AU$129.99

$99.99 / £89.99 / around AU$179.99

Dimensions

9.06 x 4.21 x 2.17in / 230 x 107 x 55mm

9.02 x 4.20 x 2.13in / 229 x 106.8 x 54.2mm

6.93 x 3.70 x 1.34in / 176 x 93.98 x 34.03mm

Weight

10.72oz / 314g

10.72oz / 304g

0.5 lbs / 228 g

Connection

Bluetooth 5.3, Wired (USB-C), Dongle (sold separately)

Wired (USB-C)

Wireless (Bluetooth)

Compatibility

Android, iOS, Nintendo Switch, PC, macOS

Android, iOS

iOS

Software

GameSir App (Android only)

GameSir App

Scuf Nomad Companion App (iOS)

GameSir G8+ MFi
The G8+ MFi is the wired, Apple-friendly equivalent from the same family. It offers MFi certification, full GameSir app support on both iOS and Android, passthrough charging, a headphone jack, and functional back buttons on every platform. If you don't need wireless or Switch/PC compatibility, it's the more complete package.

For more information, check out our full GameSir G8+ MFi review

Scuf Nomad
The Scuf Nomad is an iPhone-only Bluetooth alternative with a lighter build, 16 hours of battery life, and an app that actually works on iOS. It's more compact, handles phone cases better, and has configurable rear paddles. The trade-off is no Android, Switch, or PC support and a higher price tag.

For more information, check out our full Scuf Nomad review

• Tested with multiple devices
• A wide variety of games tried
• Compared to other mobile controllers

I spent several days testing across iOS, Android, PC, and macOS, with a focus on comparing the experience to the wired G8 and G8+ MFi I'd previously reviewed.

I tested on an iPhone 17 Pro and POCO X5 Pro 5G, playing Fortnite, Call of Duty Mobile, and Forza Horizon 6 via Xbox Cloud Gaming on mobile, and Stardew Valley via Steam on PC. I evaluated Bluetooth connectivity, app compatibility, back button functionality, latency feel, vibration motors, and cross-platform mode switching.

Read more about how we test

First reviewed June-July 2026

The contentious issue of data centers — and their impact on the environment and local communities — continues to make headlines, as the need for more computing power comes up against concerns about whether that extra capacity is worth the cost.

One of the natural resources that data centers need is water, and plenty of it, to cool down the chips running calculations. For regions already living through rising temperatures and climate change, that's a big ask, and it's understandably getting a lot of attention.

It's also something the tech giants building these data centers are aware of, and Google has just announced a strategy for using water more responsibly: "how we build is just as important as what we build," Google says. Here's what the plans are, and the size of the problem we're dealing with.

Data centers are nothing new of course, and are needed for everything from hosting this TechRadar website to delivering movies on Netflix. With the rise of AI, however, there's been a need for more data center capacity, and a higher level of performance from data centers — which all adds to the amount of water needed for cooling.

If you find data center water usage figures confusing, you're certainly not alone. There's a lot of variation in the statistics used to measure it, for all kinds of reasons: data centers water usage can vary significantly from site to site, for example, and there's also the question of what counts as water usage.

Should the water needed to generate the electricity to power a data center be included, or not? What standard is used to measure water 'lost' to the environment if it's returned to the local water cycle? These questions are answered differently in different reports, hence the discrepancies in figures — and the problem is compounded by the fact that many data centers simply don't report their water usage at all.

While these figures are a little out of date now, a 2021 study put direct (on-site) data center water usage at 1.7 billion liters per day in the US, compared to a national water consumption of 1,218 billion liters per day — so that's less than 1%. As is often pointed out, golf course usage is about four times more.

A few points worth noting: that doesn't account for indirect water usage, and data center demand is rising fast (unlike, say, water for golf courses). Most importantly though, the significant impacts of data center installations are felt at the local level, not the national level. The largest data centers can use up the same amount of water as a town of 50,000 people, which has clear implications for the people in that town.

Many data centers are being built in water-stressed areas, and then there are the other factors to consider, like electricity demand and noise pollution. While water usage for data centers at a national level may be a small fraction, that doesn't mean it isn't a major problem at a local level, and the problem is getting worse.

There are five commitments that Google is making. First, more water will be added back into the system than is consumed by Google data centers by 2030, mostly by separate projects looking at more efficient water use and reduced waste (a little bit like planting trees to offset plane trips).

Second, the company is going to invest hundreds of millions of dollars into water infrastructure, to make sure areas where data centers are located are kept well supplied. Third, Google says it will use air-cooled or recycled water data centers in places where water is particularly scarce (these solutions use more electricity and are more expensive, but they don't demand as much water).

Fourth, Google is committing to being transparent when it comes to the water use of its data centers — something that is by no means standard across the industry at the moment. Fifthly and finally, Google says it will "pursue alternative and reclaimed solutions to protect water resources", including looking at reclaimed wastewater.

"We think it’s really important to sort of put a blueprint out there that communities can reference," Google's Ben Townsend told The Verge. "So if somebody else comes and says, 'we'd like to build a data center there', a community can say, 'well, here are five different things that really put the community and the watershed first... are you doing these?'"

Water usage is only part of the data center story, and it's a story that's becoming increasingly complex and multi-faceted. But positive action (or at least the promise of positive action) is better than nothing, and this may help to shift the industry towards more responsible and sustainable infrastructure.

Turning around public sentiment might be more difficult than cutting down on water usage though. While the hype from AI companies continues, and huge changes are being seen in areas such as software coding, there are still a significant number of people who aren't keen on generative AI and what it brings with it — even before getting to the issue of how many natural resources it uses up.

As a Batman fan, I was disappointed to learn last week that The Batman Part 2 has been delayed until February 18, 2028, another four-month wait to add to add to its last (delayed) intended release date of October 1, 2027. This latest holdup is actually the fourth time the long-awaited sequel to The Batman has been delayed, with its initial release originally set to be October 2025.

Thankfully, there are plenty of ways to enjoy Batman content at home while we eagerly await The Batman: Part 2’s 2028 release. From Christopher Nolan’s iconic Dark Knight Trilogy to the awesome Batman: The Animated Series, there are tons of choices. And there’s no better way to enjoy Batman’s many adventures than with a 4K Blu-ray. I’m a 4K Blu-ray fan and collector, so I’m always testing the latest releases for the Blu-ray Bounty and finding new discs to test the best TVs and best soundbars.

Below, I’ve picked three of my favorite Batman-related 4K Blu-rays, not just because they’re my personal picks, but because they’re also great examples to show what 4K can do, especially for your home theater.

Where else to better prepare for The Batman: Part 2 than with its predecessor, The Batman. Matt Reeve’s The Batman follows Bruce Wayne (Robert Pattison) in his second year as Batman, where he must face The Riddler (Paul Dano), a revolutionary who uses a series of riddles and puzzles to test Batman, as Riddler plans to expose Gotham’s corrupt government and elite.

The Batman has become one of my main 4K Blu-rays for testing TVs. Due to its low brightness, some TVs can really struggle to accurately display the movie, compromising its dark tones. But, there’s also plenty of excellent-looking scenes with powerful contrast, balancing light and dark tones, that can really show off a TV.

The opening 20 minutes of the movie itself is all a big demo-reel for contrast. From the dark subway platform illuminated by overhead lamps as Batman fights a gang of thugs, to where we first see Bruce decoding Riddler’s clues in the Batcave, The Batman delivers truly dynamic and strong contrast, which I've found look superb on the best OLED TVs in particular.

There’s also a chance to show a display’s shadow detail, with plenty of scenes making use of shadows to create a captivating image. The aforementioned subway scene is one of these, with truly dark shadows creating a foreboding atmosphere that fits the gloomy tone of the movie.

There’s excellent detail throughout, with crisp textures that look refined and lifelike. Close-up shots show scars, wrinkles and stubble on people’s faces with impressive clarity, and texture in environments, like Mayor Mitchell’s house or the Batcave, are given a near-3D level of detail.

The Batman is an audio showcase as well as a visual one. The Batmobile chase has become a reference scene I use for showing off a sound system. The ignition of the Batmobile’s engines deliver room-rattling, powerful bass that through a subwoofer can create some serious roar. The 4K disc uses a Dolby Atmos soundtrack that creates an immersive and detailed sound.

As the Batmobile chases Penguin across a busy freeway, serving traffic and blaring horns are accurately mapped to the action. As Penguin fires a spray of bullets at the Batmobile, the sound glides around a surround system, as I found when using soundbars such as the talented Samsung HW-Q990H. There are plenty of Atmos effects too, as rain regularly falls throughout the movie, effectively using the height channels of any sound system.

Arguably the most popular Batman movie ever made, The Dark Knight is the second movie in Christopher Nolan’s trilogy. It’s one that’s stuck with me ever since I saw it as a teenager in theaters in 2008. Bruce Wayne (Christian Bale) is a couple of years into his time as Batman and he faces his biggest challenge yet, when he squares off with the unpredictable and chaotic Joker (played brilliantly by Heath Ledger).

Unsurprisingly, where this disc shines is in its IMAX sequences. These IMAX scenes show impeccable detail and crisp, 3D-like textures. In the opening bank heist scene, every detail is refined, from the creases in the robbers’ masks, to the texture in buildings of the densely packed city. Oh, and don’t be surprised when the ratio changes from widescreen to fullscreen: that’s normal for IMAX on home media.

Black tones and shadow detail are excellent during the film's night scenes too (of which there are plenty), and they look superb on an OLED TV. Contrast is also strong, particularly during the prison escort scene. As trucks move under the freeway, the overhead lights balance well with the dark, shadowed areas of the tunnel to create dynamic contrast.

This disc is also an audio powerhouse. With a DTS-HD 5.1 MA soundtrack, there’s some fantastic detail. During the tunnel escort scene, the whir of Batman’s bike riding through the tunnel is mapped perfectly to every channel. As perspective changes, so does the sound. Bullets are precise, flying from the front to rear channels when the movie is from Batman’s point-of-view, and every individual effect is audible, such as flying debris and swerving tyres.

Bass throughout the movie is truly powerful. Bullets have serious impact and the roar of the Batmobile’s engines delivers tightly controlled, but hefty low-end that reverberated through our testing room when I watched.

The score is a showcase in and of itself, with superb separation across different channels of the Samsung HW-Q990C soundbar I was using. In the opening scene, the scratching strings came from the left rear, the ticking sound from the right, and the heavy bass exploded from the subwoofer. Crucially though, every element was perfectly balanced, within the score itself and with all the action.

This pick will raise eyebrows, I’m sure. But, honestly, Batman Forever is the Batman movie I grew up with and despite its very corny nature, I enjoy it. It scratches the exact part of my brain that occasionally craves a nostalgic Batman fix. The movie follows Batman (played by Val Kilmer) as he does battle with the Riddler (Jim Carrey) and Two-Face (Tommy Lee Jones) as they attempt to take over Gotham.

While this may be a surprising choice for a lot of people, this is a seriously good-looking 4K presentation. Batman Forever uses a lot of bold and vibrant colors, and in 4K, they really pop on screen. The green of the Riddler’s gaudy outfit and the purple of Two-Face’s injured side compliment each other well. There’s also a lot of neon-esuqe lighting used in the movie, with light tubes, red detail on Two-Face’s minion’s guns and the shimmering greens of Riddler’s hideout and event space. All these colors have a gorgeous punch that looks sharp and dynamic throughout the movie.

Shadows are used a lot, with characters often standing over lamps or in shaded rooms to create strong contrast in images. The LG G6 OLED on which I watched this movie in our testing room celebrates these rich and inky dark tones, with the leather of Batman’s armor showing nice depth, but also balancing well as the light reflects off it. Shadow detail is excellent too, with textures in dark areas on screen legible (yes, even the strange texture of Batman’s armor). Skin looks realistic in the many close-up shots used, too.

This 4K disc also supports Dolby Atmos. There’s some excellent use of height channels throughout, with the sound of helicopter Two-Face uses to escape in the intro coming from overhead as I watched. Explosions have plenty of meat to them, producing some lovely low-end rumble during the movie’s more action-packed scenes. The sound of the Batmobile’s engines firing is another great demo for the powerful bass in the mix.

More subtle details are also fully audible. The sound of Batman’s batarang as he throws it is precisely mapped, with the sound eagerly following its trajectory. Bullets have great punch to them, and again these are accurately posited within the surround channels. Speech is consistently clear throughout too, even during the most chaotic scenes. You might not necessarily expect this movie to be such an audio showcase, but it really is.

• US factories prepare to manufacture Ukraine's battle-tested MAGURA naval drones domestically
• MAGURA V7 reportedly destroyed an aerial target using Sidewinder missile technology
• Oregon and South Carolina will host future MAGURA drone production facilities

Ukrainian defense company UFORCE has signed an agreement with US boatbuilder RECONCRAFT to manufacture the combat-proven MAGURA naval drones domestically.

Reports from The Wall Street Journal has claimed the memorandum of understanding was recently signed at the Embassy of Ukraine in Washington, with production planned at facilities in Oregon and South Carolina.

The project will have the eventual goal of building hundreds, and potentially thousands, of units annually.

MAGURA drones gained international recognition after repeated strikes helped push much of Russia's Black Sea Fleet away from Crimea.

The MAGURA family has since expanded beyond strike missions to include aerial drone launches, mine countermeasures and anti-submarine sonar towing, with the MAGURA V7 variant also capable of engaging helicopters and fixed-wing aircraft.

RECONCRAFT builds combatant craft for US and partner special operations forces, while UFORCE developed the MAGURA program from the outset.

Under the partnership, both companies will contribute manufacturing equipment, materials and personnel to support the new production lines in both states.

"Partnering with UFORCE combines our manufacturing expertise and capabilities with the combat-proven autonomy of the MAGURA platform,” said Joe Silkowski, co-founder of RECONCRAFT.

This allows "us to deliver greater capability to American warfighters faster than developing a new system from the ground up."

The agreement follows increased Pentagon interest in lower-cost autonomous platforms after recent conflicts in Iran revealed how expensive drone warfare can be.

Ukraine reported what it described as the world's first successful naval drone strike against an aerial target during late 2024 using a MAGURA V7 armed with AIM-9 Sidewinder missiles.

In April 2026, MAGURA unmanned surface vessels also took part in the US-Philippines Balikatan military exercise, reportedly sinking a target ship during a live-fire demonstration in the Luzon Strait.

“Today’s combat environments show that autonomous warfighting capabilities are a must-have,” said UFORCE CEO Oleg Rogynskyy.

“UFORCE is exceptionally positioned to deliver capabilities already tested by some of the world’s most sophisticated militaries under the most demanding battlefield conditions.”

"Working with RECONCRAFT, we will help ensure these proven autonomous capabilities become available to the US,” Sean Plankey, CEO of UFORCE USA, added.

“It's exactly the kind of industrial partnership the Arsenal of Democracy is designed to enable."

As of the time of writing, neither UFORCE nor RECONCRAFT has indicated how US production could influence the price of future MAGURA drones.

Production in the United States is typically costlier than overseas alternatives, a dynamic long observed across industries from electronics to textiles.

It is one reason American companies like Apple choose to build their gadgets outside the country, with lower manufacturing costs and established supply chains.

Whether this same cost pressure will raise the price of American-built MAGURA drones compared to their Ukrainian-made counterparts is not yet known.